Solo A7  Smoke Detector Cleaner Duster Spray Aerosol  

Our recent posts and communications have focused on Regulation (EU) No 517/2014 which requires manufacturers of non-flammable aerosols containing HFC 134a to end manufacture of such products by 31st December 2017.As part of this change we’ve introduced a new range of smoke aerosols and also alternative products which have no reliance on pressurised aerosols – all of which are compliant with the upcoming regulations.

The final change to our 2017/18 product range will see our Solo A7 detector duster phased out.  Like some of our smoke aerosols, Solo A7 contains HFC 134a and, as result, can no longer be produced beyond 31st December 2017.

Since we introduced the product, a large number of pressurised air dusters have come to market – as a result of which there is now plenty of product choice.  With this in mind, we have taken the decision not to develop a replacement product for Solo A7 after manufacture ends later this year.  We expect to have product to carry into 2018 but this will only be available whilst stocks last.This move allows us to focus on serving customers with specialist solutions for the functional testing of fire detectors.

 Non-flammable

 Powerful

 Simple to use

 Non-abrasive

MATERIAL SAFETY DATA SHEET

Prepared to Commission Directive

1907/2006 and US OSHA Standards

Data sheet No: MSDS0077UK Issue: 4 Date: 21.07.09

WHAT IS THE PRODUCT AND WHAT INFORMATION IS REQUIRED IN AN

EMERGENCY?

SECTION 1 - IDENTIFICATION OF SUBSTANCE AND OF THE COMPANY

Product Name: SOLO

Detector Duster

Part Number: SOLO A7

- XXX (XXX denotes product variant reference)

Manufacturer:

No Climb Products Ltd, Edison House, 163 Dixons Hill Road, Welham Green,

Hertfordshire AL9 7JE United Kingdom

Tel +44 (0) 1707 282760; Fax +44 (0) 1707 282777

SECTION 2 - HAZARD IDENTIFICATION

Not regarded as a health or environmental hazard under current legislation

FIRE AND EXPLOSION HAZARDS:

This product is classed as a non-flammable aerosol. However mixtures of HFC-134a with

high concentrations of air at elevated pressure and / or temperature can become

combustible in the presence of an ignition source.

As with all pressurised aerosol containers, cans may burst if heated to over 500C (122oF).

SECTION 3 - COMPOSITION/INFORMATION ON COMPONENTS

Components EINECS No.

CAS No. Approx. wt.%

Symbo EC Risk phrase/class

HFC 134a (1,1,1,2- Tetrafluoroethane)

The full text for all R / S phrases are

shown in section 16

212-377-0 811-97-2

80-100

NC Not classified

WHAT SHOULD BE DONE IF A HAZARDOUS SITUATION OCCURS?

SECTION 4 - FIRST AID MEASURES

Eyes:

Skin:

Ingestion:

Unlikely to happen as the product is a vapour/mist at room temperature; If product

enters mouth, rinse mouth out with water and avoid swallowing;

Inhalation:

SECTION 5 - FIRE FIGHTING MEASURES

Extinguishing Media:

Unusual Fire & Explosion Hazards:

Special exposure hazards:

Wear appropriate protective clothing and equipment to prevent skin and eye contact.

Avoid breathing gas

2

SECTION 6 - ACCIDENTAL RELEASE (SPILL AND LEAK) MEASURES:

Person-related safety precautions:

With uncontrollable releases (i.e., release from several cans at once), evacuate affected area

and ventilate;

Measures for cleaning:

Ensure adequate ventilation to allow for evaporation

HOW CAN HAZARDOUS SITUATIONS BE PREVENTED FROM OCCURRING?

SECTION 7 - PRECAUTIONS FOR SAFE HANDLING, STORAGE & USE

Safe handling:

Contents are under pressure- do not puncture or force open cans even when empty

Safe Storage:

Observe official regulations on storing packaging with pressure containers;

Store containers in cool, dry locations away from direct sunlight and do not store at

temperatures exceeding 50

oC (122o

F) (e.g. passenger or back seat of a car in summer

months)

Safe Use:

As with all chemicals, avoid getting this product IN YOU- do not eat and drink whilst

handling chemicals;

Ensure good ventilation/mechanical exhaustion at workplace- if this is not possible, take

regular breaks from use;

Do not deliberately concentrate or inhale vapours;

Follow label directions carefully.

Do not spray on a naked flame or incandescent material.

SECTION 8 - EXPOSURE CONTROLS

Occupational Exposure Limit

HFC 134a (1,1,1,2- Tetrafluoroethane) 1000ppm / 4240mg / m3 (8hr TWA reference period).

Respiratory Protection:

No protective device is required during normal use of product;

Mechanical ventilation is recommended where product is used in confined or poorly

ventilated spaces.

Hand and Eye Protection:

Not normally required when used as directed.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical & Chemical properties:

Appearance - Clear Colourless liquefied gas

SECTION 10- STABILITY & REACTIVITY

Stability:

Normally stable;

Conditions to avoid:

Extreme heat, direct sunlight;

3

WHAT IS THE IMPACT OF THIS PRODUCT ON HEALTH AND THE ENVIRONMENT?

SECTION 11 - TOXICOLOGICAL INFORMATION

Under normal usage, this product should pose little risk to the health of the user.

Skin, Eyes and Respiratory system:

Inhalation:

Gas or vapour displaces oxygen available for breathing (asphyxiant).

Skin: Liquid on skin could result in freeze burns.

Eyes: Liquid splashes could result in freezing of the eye tissue.

SECTION 12 - ECOLOGICAL INFORMATION

Environmental Hazards:

SECTION 13 - DISPOSAL CONSIDERATIONS

Waste disposal method:

•

Do not puncture or incinerate even when empty;

Dispose of in accordance with Local Authority Requirements

WHAT INFORMATION DO I NEED TO KNOW REGARDING THE TRANSPORTATION,

CLASSIFICATION, PACKAGING AND LABELLING OF THIS PRODUCT?

SECTION 14 - TRANSPORT INFORMATION

Designation of Goods / Proper Shipping Name:

Aerosols, non-flammable

UN- Number:

UN 1950

Land Transport (ADR/RID):

UN1950; Class 2.2

Maritime Transport (IMDG)/Land-Sea Interface:

UN1950; Class 2.2

Air Transport (ICAO-TI/IATA):

UN1950 Class 2.2

SECTION 15- REGULATORY INFORMATION

Designation according to EC Guidelines

This product has been classified and labelled in accordance with relevant EC Directives and

national laws including the HSH Approved Supply List (L142) and UK's CHIP (as currently

amended) regulations.

Code and hazard designation of product:

Not applicable

Risk R- Phrases:

Not classified

Safety S- Phrases:

S2 - Keep out the of reach of children;

S23 - Do not breathe gas / fumes / vapour /spray

S51 - Use only in well ventilated areas

S9 - Keep container in a well ventilated place

S35 - This material and its container must be disposed of in a safe way4

SECTION 16 - OTHER INFORMATION

Revision Status:

As our policy is one of continuous improvement, details of products described within this publication are subject to change without notice. All information provided here is believed to be correct at the time of going to ress. Every effort has been made to ensure the accuracy of information which is provided in good faith but nothing contained herein is intended to incorporate any representation or warranty, either express or implied or to form the basis of any legal relations between the parties hereto, additional to or in lieu of such as may be applicable to a contract of sale or purchase.

1.New Material Data Sheet Issue 1: 28-10-2003

2. Change of Address Issue 2: 04 -12-2003

3. Section 14 amended to include reference to Designation

& Class 2.2 Issue 3: 30 -08-2005

4. Commission Directive added page 1

Section 8 OEL (Occupational Exposure Limit) added Issue 4: 21-07-2009 Consult local and national regulations;Not classified as dangerous to the environment;Possible risk of can rupture when exposed to fire/high temperaturesUse water spray to keep containers cool that are exposed to heat or flames. Useextinguishing media as appropriate for surrounding fire.

Provide fresh air, warmth and rest, preferably in a comfortable upright sitting position.Rinse the skin immediately with lots of water;•Rinse the eye with water immediately

Solo A7  MSDS Safety Certificate

Solo A7  Datasheet 

Solo Detecter Tester General Catalogue

Solo Dedektör Test Product Select Tabel