Solo 371-001 Smoke Generator for Solo 365 Singular Replacement Smoke Cartridge

The SDi SOLO371 is an electronic smoke generator for use with the SOLO365 Smoke Tester.

It is included in the SDi SMART 365 Compact Smoke Testing Kit.

 Installing the Generator

• Open the back cover

• Remove protective packaging of generator. Do not touch exposed electrical contacts.

• Insert generator rmly into recess, engaging clips 1 and 2 (see Fig.1).

• Once the generator is inserted do not remove it until indicated that a replacement is necessary.

• When replacing a generator, any dust or debris within the Solo 365 housing can be removed using an air duster. Any condensation can be removed by wiping with a lint-free cloth 

Note: When replacing the generator, ensure that the unit is switched off before opening the back cover.

 Remove the smoke cartridge from within the generator.

• Disengage clip 1 and lift. Repeat for clip 2 to remove the used generator.

• When replacing a generator, any dust or debris from the main unit can be removed with an air duster. Any condensation can be removed by wiping with a lint-free cloth.

Replacing

Insert the generator firmly into the recess, engaging clips 1 and 2.

• Once the generator is inserted do not remove it until it is indicated that a replacement is necessary.

Smoke Generator for use with Solo 365 Smoke Detector Tester

Field replaceable part Easily fits within Solo 365 

Detector Test and Maintenance

Test equipment must be proven to be safe for the engineer and the system, it needs to be cost-effective, versatile, portable, approved by detector manufacturers and in compliance with international codes and standards.

 Insert the generator firmly into the recess, engaging clips 1 and 2. • Once the generator is inserted do not remove it until it is indicated that a replacement is necessary.

Remove the smoke cartridge from within the generator. • Disengage clip 1 and lift. Repeat for clip 2 to remove the used generator. • When replacing a generator, any dust or debris from the main unit can be removed with an air duster. Any condensation can be removed by wiping with a lint-free cloth.

his statement confirms that the product detailed below complies with the specifications currently published in the RS media and has been subject to the strict quality conditions imposed by RS Components’ internal management systems. Furthermore and where applicable, it confirms that all relevant semiconductor devices have been handled and packed under conditions that meet the administrative and technical requirements of ANSI/ESD S20.20 and EN61340-5-1 electrostatics control standards.

RS Stock No. 146-6815

Name No Climb Smoke Generator

Manufacturer/Brand Name No Climb

Mfr. Part No. SOLO371-1pack

The foregoing information relates to product sold on, or after, the date shown below.

RS COMPONENTS

Date Dec 5, 2018

RS Components Ltd 21/F Multinational Bancorporation Centre 6805 Ayala Avenue Makati City Philippines

The restricted substances and maximum allowed concentrations in the homogenous material are, by weight:

The supplier of the item listed below has informed RS Components that the product is “RoHS Compliant”.
RS Components has taken all reasonable steps to confirm this statement. Information relates only to products sold on or after the date of this certificate. 

Solo 371-001Smoke Generator  User Files

Solo 371-001 Smoke Generator User Manual

Solo 371-001 Smoke Generator User Manual2